Reciprocating compressors

Reciprocating compressors 1000 RPM

These type of compressors have a distinctive direct transmission in a single block of 2 or 3 cylinders arranged in a W shape up to 5 single or double effect compression stages.
The rotary speed equals 1000 revs per minute, is absolutely oil free, and engines from 55 kW to 160 kW can be installed (in the standard versions). Should highly significant hourly loads be required, our technical office will be able to satisfy every need by designing a tailor-made compressor.
These type of unities are recommended for uses requiring an input pressure range of between 1 and 50 Bar and an output pressure that can be set from between 180 and 250 Bar. Depending on the input pressure, hourly capacity of 2500 Scm/h can be reached.

Reciprocating compressors for technical gases (Nitrogen, Helium, Carbon Dioxide, Air, etc.)

This family of compressors stems directly from over 50 years of experience in the field. We design, manufacture, and commission compressors capable of handling technical gases (other than methane), such as hydrogen, nitrogen, helium, carbon dioxide, air, etc. All units produced are designed and manufactured strictly according to the technical specifications of the customer; we adapt to the customer's needs, not the other way around!

Reciprocating compressors 611 RPM

These type of compressors are belt driven, single block of 2 or 3 cylinders arranged in a W shape, up to 5 compression stages, single or double effect.
They have rotary speed of 611 revs per minute, and they are absolutely OIL FREE, with installed power form 55 kW up to 160 kW (in standard type). Should highly significant hourly capacity be required, our designer will be able to satisfy every need by designing a tailor-made compressor. This type of unities are recommended for uses requiring an input pressure range of between 1 and 50 Bar and an output pressure that can be set from between 180 and 250 Bar. Depending on the input pressure, hourly capacity of 1800 Scm/h can be reached.